HT Spall-FX2  
HT Spall-FX2 is a rapid set, high strength ultra low viscosity Polyurea repair material. This two part, 1:1 system is 98% solids and designed for rebuilding and repairing broken control joints and spalled concrete surfaces very quickly. HT Spall-FX2 is intended for use in damaged control joints or warehouse spalls where there is no movement and damage is from steel wheels or small hard urethane wheels.  HT Spall-FX2 has an extended pot life for larger jobs requiring more time. 

Download Product PDF

 

  • Rebuilding control joints
  • Shallow spalls on bridge decks
  • Traffic area spalls & crack repairs
  • Grade matching
  • Floor repair
  • Stops additional damage
  • Fill & repair spall before coating
  • Used to “knit” cracked slabs


  • Meets USDA and FDA Requirements
  • Cures from  -20° F to 130° F.
  • “Drive-Over” in 10 to 15 minutes
  • Produces High Strength Quickly
  • Self-leveling
  • Self Priming
  • Fast initial set; rapid gain to ultimate strengths.

    • Viscosity (Mixed)                                         25 cps
    Hardness, durometer (ASTM D2240)          67 to 72D
    Tensile Strength, PSI (ASTM D412)                   4600
    Tear Strength (ASTM D624)                      -lb/mil 489
    Elongation % (ASTM D412)                        6% to 8%
    Compressive Strength (neat)                       3900 psi
           (ASTM C109        (with sand)                4800 psi
    Bond Strength (ASTM 882-99)                           3450

    22 oz. & 56 oz. Cartridges
    1 Gallon Kit (with proportioning chambers)
    2 Gallon, 5 Gallon, 10 Gallon Kits
    		 
    Untitled Document
     Spall Repair
     Road Repair
     Pumps
     Epoxy Products
     Polyurea
     Other Products
     Product Chart


    Member Login

             User   
      Password   
      
     
     
    Website Design by Optious