Email  
 
 
HT-HC64  
HT-HC64 is a technologically advanced, two component, fast set, rapid cure, solvent free*, flexible, high performance, and high solids  elastomer that can be applied to properly prepared interior or exterior concrete, plywood and metal surfaces.  Due to its fast gel time, HT-HC64 is suitable for applications in temperatures as low as 20°F.  It may be applied in single or multiple applications.  HT-HC64 is also relatively insensitive to moisture and temperature allowing applications in various temperatures and ranges of humidity.
*Contains some high boiling colorless plasticizers.



Download Product PDF

 

  • Non-Gassing
  • Seamless
  • Recoatable
  • Good Thermal Stability
  • Good Chemical Resistance
  • Excellent Low Temperature Flexibility    
  • Can Be Applied at Any Thickness          
  • Meets USDA Criteria
  • Interior or Exterior Applications

  • Vehicular Traffic Areas
  • Sundecks & Balconies
  • Horse Stalls
  • Wash Racks
  • Kennels
  • Exterior & Interior Walkways, Patios & Stairways
  • Interior Floors & Mechanical Rooms

    • Solids by Volume                                                                          95%
    Pot Life (min @ 75°F, 50%RH)                      15 =/-minutes
    Tack Free Time @75°                                        4 – 6 hours
    Elongation, ASTM D-412                             1,200 +/- 100%
    Tensile Strength, ASTM D-412                 1,500 +/- 100 psi
    Hardness, ASTM D-2240                                     64 +/- 3 A
    Tear, ASTM D-624                                          230 +/- 25 pli
    Split Tear, ASTM D-470                                    60 +/- 10 pli
    VOC                                                                     55 grams/liter

    Can be applied with a roller, squeegee or notched trowel to spread HT-HC64 evenly over the entire surface. HT-HC64 may be applied at any ambient temperature. Curing time will depend on temperature.


     
    Home    About     Contact    Sitemap