The HT-CIK Crack Injection Kit was designed for small scale repairs to cracked concrete and block. All that is needed is a standard 10 oz. caulking tool, everything else required is included in this kit. HT- CIK is a high strength two component 1:1 ratio adhesive binder with super low viscosity for deep penetration. It is an excellent adhesive for use in crack grouting by injection or gravity-feed.
250 cps
67 to 72D
4600
-lb/mil 489
6% to 8%
3900 psi
4800 psi 3450
If the crack or surface is contaminated, they must be first cleaned of loose debris and contaminants such as dirt, salts, efflorescence, oil, loose materials, rubber, paint, grease, or other foreign material that would be detrimental to bond the HT-CIK. Do not use solvents and make sure the area is dry. Vacuum or blow off cement dust.
