HT-PE60 is designed specifically for filling exterior control joints, new construction joints, and exterior random cracks on horizontal concrete surfaces to help protect from pneumatic-tired vehicles and prevent penetration of water and incompressibles into the joints. Highly flexible, allowing normal joint and slab movement as designed, yet strong enough to protect the vertical edges of concrete from spalling under extreme loading. Exposure to ultraviolet light will cause discoloration, however the physical properties are unaffected. It is recommended to broadcast sand over the material while curing to help minimize discoloration.

1. Freeways
2. Airport Runways
3. Taxiways
4. Refueling & Maintenance Areas
5. Bridge Decks
6. Elevated Parking Structures
7. Sidewalks

100% Solids, Contains No VOC's

Flexible, 420-435% Elongation

Return Project to Service in 60 Minutes

Cures From -20ºF to 130ºF

Odorless, No Toxic Vapors

Resistant to Petrochemicals & Jet Fuels

Remains Flexible, Even in Cold Temperatures

Color                      A+B                                               Clear
Viscosity (mixed)                                             Self Leveling
Mix Ratio (by volume)                                                    1:1
Pot Life  100 grms at 77°F                                          1 min
Tack Free (thin film) @ 77°F                                      3 min
Initial Cure                                                                  15 min
Final Cure                                                                   60 min
% of Elongation                    ASTM D-412                420 min
Tensile Strength, psi            ASTM D-412                620 min
Shore “A” Hardness            ASTM D-2240               60-62 A
Tear Strength, pli, Die C      ASTM D-624                 135 min

22 oz. Cartridges

56 oz. Cartridges

10 gal. Units

110 gal. Units