HT-PE65 is designed specifically for industrial floor applications, which receive light vehicle traffic, such as pedestrian traffic and soft wheeled carts such as shopping carts and stocking carts. To fill interior control joints on horizontal concrete. Slightly flexible, allowing small slab movement, yet strong enough to protect the vertical edges of concrete from spalling under light loading. Interior applications when little joint movement from thermal cycling will occur. Exposure to ultraviolet light may cause slight discoloration, however the physical properties are unaffected.

1. Grocery Stores
2. Department Stores
3. Industrial Facilities
4. Warehouse Floors
5. Manufacturing Facilities
6. Bottling and Canning Facilities
7. Airports
8. Cold Storage Facilities
9. Food Processing Facilities
10. Freezers

100% Solids, Contains No VOC’s

Can be Polished without Smearing

Meets USDA & FDA Requirements

Return Project to Service in 60 Minutes

Cures From -20ºF to 130ºF

Odorless, No Toxic Vapors

Resistant to Petrochemicals

Remains Flexible, Even in Cold Temperatures

Color                      A+B                                Concrete Grey
Viscosity (mixed)                                            Self Leveling
Mix Ratio (by volume)                                                    1:1
Pot Life  100 grms at 77°F                                         1 min
Tack Free (thin film) @ 77°F                                      3 min
Initial Cure                                                                 15 min
Final Cure                                                                60 mins
% of Elongation                    ASTM D-412               420 min
Tensile Strength, psi             ASTM D-412               740 min
Shore “A” Hardness            ASTM D-2240              65-67 A
Tear Strength, pli, Die C      ASTM D-624                 145 min

22 oz. Cartridges

56 oz. Cartridges

10 gal. Units