HT-PE75 is designed specifically for industrial floor applications, which receive light vehicle traffic, such as forklifts or soft wheeled carts. To fill interior random cracks, damaged control joints, or new control joints on horizontal concrete. Slightly flexible, allowing small slab movement, yet strong enough to protect the vertical edges of concrete from spalling under extreme loading. Interior and Exterior (exterior applications when little joint or crack movement from thermal cycling will occur.) Exposure to ultraviolet light may cause discoloration, however the physical properties are unaffected.

1. Industrial Facilities
2. Warehouse Floors
3. Manufacturing Facilities
4. Grocery Stores                
5. Bottling and Canning Facilities              
6. Airports
7. Department Stores
8. Cold Storage Facilities
9. Food Processing Facilities
10. Freezers

100% Solids, Contains No VOC's.

Can be polished without smearing

Meets USDA & FDA Requirements

Return Project to Service in 60 Minutes

Cures From -20ºF to 130ºF

Odorless, No Toxic Vapors

Resistant to Petrochemicals

Remains Flexible, Even in Cold Temperatures

Color                      A+B                                 Concrete Gray
Viscosity (mixed)                                             Self Leveling
Mix Ratio (by volume)                                                    1:1
Pot Life  100 grms at 77°F                                          1 min
Tack Free (thin film) @ 77°F                                     3 min
Initial Cure                                                                  15 min
Final Cure                                                                 60 mins
% of Elongation                    ASTM D-412               290 mins
Tensile Strength, psi             ASTM D-412               740 min
Shore “A” Hardness            ASTM D-2240              75-77 A
Tear Strength, pli, Die C      ASTM D-624                 160 min

22 oz. Cartridges

56 oz. Cartridges

10 gal. Units